Fire alarm & ELV · MO.tool
Public Address
Wire speakers into zones, number them, check each 100 V line and draw the schematic.
Available in Free Trial, Full Package, or a custom bundleINTERACTIVE EXAMPLE
Check the 100 V line.
Add speakers to the zone and watch the level at the last one.
Press play to watch it work.
DEMO6 × 6 W = 36 W on the line · level drop at last speaker ≈ 0.48 dB (within 1 dB)
Explore with sample geometry here. Run the tool on your project inside Revit.
MO.tool collection overview
The collection overview is shown until a walkthrough for this tool is added.
How to use it.
- 01
Select the speakers on the plan.
- 02
Wire them into zones and number them.
- 03
Check the 100 V line of each zone, then draw the schematic.
Works well with Public Address.
Give your feedback about Public Address
Tell us what you think about Public Address, or describe a problem you ran into. Only the MO.tool owner reads it, and we will reply by email when it helps.