MO.tool
Electrical · MO.tool

Lightning ProtectionNEW

Lightning protection to IEC 62305: risk assessment and class, mesh and rods on the roof you pick, down conductors, earthing and the calculation sheet.

Available in Free Trial, Full Package, or a custom bundle
INTERACTIVE EXAMPLE

Protect the roof.

Pick a protection class and watch the mesh and the down-conductor spacing follow.

ELECTRICAL DESIGNSample project

Press play to watch it work.

DEMO
MESH 5 × 5 mLPS · CLASS IMesh5 × 5 mRolling sphere20 mDown conductors10 mEarth pits9 shownRisk R1 below RT · IEC 62305
Class I LPS · mesh 5 m, rods at the corners, down conductors and earth pits drawn

Explore with sample geometry here. Run the tool on your project inside Revit.

WATCH THE WALKTHROUGH

MO.tool collection overview

The collection overview is shown until a walkthrough for this tool is added.

IN REVIT

How to use it.

  1. 01

    Run the risk assessment (IEC 62305-2) for the class.

  2. 02

    Pick the roof: mesh, rods, down conductors and earth pits are laid.

  3. 03

    Size the earthing and print the calculation sheet.

Explore electrical
MORE IN ELECTRICAL
Cable TrayNEWElectricalPower a CircuitElectricalSwitch LabelsElectricalTemplate DesignerElectrical

Give your feedback about Lightning Protection

Tell us what you think about Lightning Protection, or describe a problem you ran into. Only the MO.tool owner reads it, and we will reply by email when it helps.