STANDARDS & FORMULAS

Transformer Sizing

The distribution transformer sized from the connected load and the voltages, then placed on the board and the single line.

Standards and regulations

  • IEC 60076-1
    Power transformers - general

    The rating steps and the loading basis.

Formulas

Apparent power

S = P / pf

  • P = the connected load (kW)
  • pf = the power factor (0.8 as a rule)

Rating with spare

S(rated) = S × (1 + spare), rounded up to the next standard kVA

Design rules it applies

  • Rounded up to a standard rating (…630 · 800 · 1000 · 1250 · 1600 kVA)
  • Placed on the board and drawn on the single line with its primary and secondary voltages

For reference. MO.tool works these out to help your design; the engineer remains responsible for it. Always check the edition of each standard your project uses and the requirements of the local authority (DEWA, ADDC, Civil Defence…).

Back to Transformer Sizing