STANDARDS & FORMULAS

Linear Lighting

Continuous linear luminaire runs laid along the rooms and corridors you pick, at the spacing you set.

Standards and regulations

  • EN 12464-1
    Light and lighting - lighting of work places, indoor

    The calculation grid, the maintained illuminance Em and the uniformity U0.

  • CIBSE
    CIBSE / SLL lighting guidance

    The first-reflected-flux estimate of the light reflected by the room.

Formulas

Run length

L(run) = n × L(fitting) + (n − 1) × gap

  • n = fittings in the run
  • L(fitting) = one fitting’s length
  • gap = the joint gap between fittings

Design rules it applies

  • Runs kept continuous along the room or corridor, squared to the grid
  • The maintained illuminance Em and uniformity U0 checked against EN 12464-1

For reference. MO.tool works these out to help your design; the engineer remains responsible for it. Always check the edition of each standard your project uses and the requirements of the local authority (DEWA, ADDC, Civil Defence…).

Back to Linear Lighting